| MODEL |
MDX-540A |
MDX-540SA |
| Usable Materials |
Plastic, resin, wood and non-ferrous metals |
| XYZ-Axis Travel |
15.7(X) x 15.7(Y) x 6.1"(Z)[400 (X) x 400 (Y) x 155 mm (Z)] |
| Loadable workpiece size with optional rotary axis (ZCL-540) * |
7.0” Diameter x 14.6” Length [177.8mm Diameter x 370.8mm Length]
Actual milling area is smaller |
| Distance From Spindle Nose to Table |
Maximum 10" (254mm) |
| Table Size |
21.7(W) x 16.5"(D) [550(W) x 420mm (D)] |
| Loadable workpiece weight |
At acceleration of 0.2G: maximum 26lb (12kg), 0.1G: 44lb (20kg), 0.05G: 44lb (20kg) |
| XYZ-axis drive system |
AC servo motor, 60W |
AC servo motor, 80W |
| Operating speed |
Maximum 295ipm (7.5m/min) |
| Acceleration |
0.2G, 0.1G, 0.05G |
| Software resolution |
RML-1 mode: 0.0004"(0.01mm ), NC-code mode: 0.00004" (0.001mm) |
| Mechanical resolution |
0.00004” (0.001mm) |
| Positioning accuracy |
+/-0.004"/12"(+/-0.1mm/300mm), under no-load conditions |
| Repeat accuracy |
+/-0.0019"(+/-0.05mm), under no-load conditions |
+/-0.0008"(+/-0.02mm), under no-load conditions |
| Origin reproducibility (when the power is switched on/off) |
+/-0.0019" (+/-0.05mm) |
+/-0.0008" (+/-0.02m) |
| Spindle motor |
DC brushless motor, maximum 400W |
| Spindle speed |
400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering |
| Tool chuck |
Tool holder format, Taper shank: JBS4002 15T |
| Control command sets |
RML-1 and NC codes |
| Interface |
USB (compliant with Universal Serial Bus Specification Revision 1.1) |
| Power supply |
Voltage and frequency: AC 100 to 120 V/220 to 240 V +/-10%, 50/60 Hz
Required power capacity: 7A (100 to 120V)/4A (220 to 240V) |
| Power consumption |
Approx. 700W |
| Acoustic noise level |
During operation (no cutting): 65dB (A) or less, during standby: 40dB (A) or less (according to ISO 7779) |
| Dimensions |
Width x depth x height: 29.3 x 37.6 x 33.8" (745 x 955 x 858mm) |
Width x depth x height: 30.1 x 37.6 x 33.8" (765 x 955 x 858mm) |
| Weight |
249lb (109kg) |
| Operating temperature |
41 to 104F (5 to 40C) |
| Operating humidity |
35 to 80% (no condensation) |
| Included items |
Handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, Roland Software CD-ROM, SRP Player CD-ROM, User's Manual, Roland Software Guide, SRP Player Installation and Setup Guide, NC Code Reference Manual, and Automatic Tool Changer (Refer to the ZAT-540 specs below.) |
Coil Binding Machines
Heat Sealing Machine
Paper Covers Rounded Corners
Polyolefin Centerfold Shrink Wrap Film
Rotary Trimmer
Sysform
Thermal Label Printer